Name: Fiber Opti Ink
Address: Ghatkopar Industrial Estate, LBS Marg, Ghatkopar West, Ghatkopar West, Mumbai, Maharashtra, 400086, IN
Telephone: +91-22-26252084
Price range: ₹₹

Question 1

What makes hot-molded FRP electrical panels superior to conventional sheet-metal panels?

Accepted Answer

Hot-molded Fiberglass Reinforced Polyester (FRP/GRP/SMC) electrical panels manufactured by Fiber Opti Ink are 100% non-corrosive, electrically non-conductive (eliminating shock hazards), UV-stabilized, fire-retardant (UL94 V-0), and rated IP55/IP65/IP67. Composite material also carries no scrap resale value, eliminating the roadside metal theft common with mild-steel or stainless-steel cabinets.

Question 2

Are Fiber Opti Ink electrical feeder pillars certified for 50kA short-circuit fault levels?

Accepted Answer

Yes. Fiber Opti Ink electrical feeder pillars and modular power distribution panels are type-tested and certified by the Central Power Research Institute (CPRI) for a short-time withstand current of 50kA rms for 1.0 second with 105kA dynamic peak thrust. They have high-conductivity electrolytic copper busbars (up to 1250A), non-hygroscopic DMC/epoxy insulators, and transparent finger-safe polycarbonate safety shrouding.

Question 3

Are direct buried splice chambers tested for heavy 20-ton vehicular road traffic?

Accepted Answer

Yes. Fiber Opti Ink Direct Buried Cable (DBC) chambers and modular handholes are certified for 20-ton vehicular road wheel load endurance under EN 124 standards. With high mechanical compression strength and diamond anti-skid chequered covers, they are used along highways and major arterial roadways for fiber optic network installations.

Question 4

Is Fiber Opti Ink an approved vendor for Reliance, Siemens, and L&T?

Accepted Answer

Yes. Fiber Opti Ink (operating as fiberindia) is officially registered under Reliance Industries Vendor Code #166627 and has supplied over 75,000+ electrical panels and 40,000+ DBC systems to Jamnagar, Hazira, and Jio networks, as well as to Siemens, Larsen & Toubro (L&T), UltraTech Cement, NTPC, and BARC.

Question 5

Do your outdoor telecom cabinets support integrated power (SMPS), battery backup, and fiber management?

Accepted Answer

Yes. Our outdoor telecom cabinets have standard 19-inch equipment racks and support 12V/24V/48V DC SMPS power supplies, Gigabit PoE switches, up to 96-fiber splice trays with organized slack storage, filtered ventilation louvers, and thermostat-controlled cooling fan trays.

Question 6

What ingress protection ratings do your electrical junction boxes achieve?

Accepted Answer

Fiber Opti Ink electrical junction boxes are certified for IP55, IP65, and IP67 ingress protection by ERDA and NABL accredited test laboratories under IS/IEC 60529. The IP67 watertight variant is submersible to 1 meter depth for 30 minutes, built with continuous tongue-and-groove silicone gaskets and SS316 captive screws.

Question 7

Where is your electrical panel manufacturing facility located in Mumbai?

Accepted Answer

Our head office and primary manufacturing works are situated at Ghatkopar Industrial Estate, L.B.S. Marg, Ghatkopar (West), Mumbai - 400 086, Maharashtra, India. As electrical panel manufacturers in Mumbai with over 35 years on site, we operate hydraulic compression molding presses, CNC tool rooms, and in-house testing labs serving clients across Mumbai, Pune, Gujarat, Maharashtra, and pan-India.

Question 8

What types of custom industrial electrical panels do you manufacture in India?

Accepted Answer

As electrical control panel manufacturers in India, Fiber Opti Ink engineers Low Tension (LT) power distribution boards, Power Control Centers (PCC), Motor Control Centers (MCC), Automatic Power Factor Correction (APFC) panels, CPRI-certified 50kA feeder pillars, weatherproof FRP junction boxes, and solar DC distribution boxes fitted with switchgear from Schneider, ABB, Siemens, or L&T.

Question 9

How can I request CAD drawings, type test reports, or an RFQ procurement quote?

Accepted Answer

You can submit an RFQ directly through our procurement page at https://fiberindia.in/contact, connect with our Mumbai engineering sales desk through our online RFQ portal, or call our office at +91-22-26252084 / +91-9820026057. We provide custom CAD layouts (.DWG/.STEP), CPRI test certificates, and commercial quotations within 24 hours.

Contact Electrical Panel Manufacturers in Mumbai, India

Request a Technical Quote or Tender Bid

Headquarters & Direct Factory Coordinates

Registered Corporate Headquarters

3 Integrated Mumbai Facilities

Key Departmental Contacts

Official Vendor Registrations & Statutory Details

Reliance Vendor Code

Income Tax Permanent Account

Central Excise Registration

Infrastructure Experience