Industrial Electrical Panels & Control Panel Manufacturing
Fiber Opti Ink manufactures heavy-duty Low Tension (LT) power distribution panels, CPRI-certified 50kA feeder pillars, weatherproof FRP junction boxes, and outdoor telecom cabinets from our works in Mumbai. More than 1,000,000 units are currently installed across Reliance Industries, Siemens, L&T, and national power utilities.
20-Ton
Road Load
Anti-skid highway DBC spec
50kA
Fault Tested
1-sec short-circuit tested
IP67
Ingress Submersible
Watertight & dust-sealed
100%
Zero Scrap Value
Theft-proof composite
Explore Product Categories & Technical Specifications
Browse hot-molded FRP junction boxes, 50kA feeder pillars, telecom cabinets, and subterranean chambers.
4-Way Hot-Molded FRP Junction Box (90×90×60mm)
Hot-molded composite electrical junction box engineered for extreme industrial weatherproofing.
4-Way Hot-Molded FRP Junction Box (116×116×80mm)
Larger volume compression-molded composite junction box for terminal routing and industrial cabling.
4-Way Engineered Polycarbonate Junction Box
High-grade molded polycarbonate junction box offering chemical resistance and dielectric insulation.
24 to 50 Terminals Electrical & Telecom Junction Box
Multi-terminal connection box with insulated earth bus and detachable cable gland plates.
60 to 100 Terminals Industrial Panel with Canopy
Heavy-duty modular terminal panel equipped with an integrated weather protective canopy.
Optical Fiber Access Switch Outdoor Cabinet
Outdoor telecom cabinet with integrated fiber management, cooling louvers, and 96-fiber splicing.
.webp "Ethernet Network Switch Cabinet (PoE & Battery Ready) - Fiber Opti Ink Technical Specifications & CAD Details")
Ethernet Network Switch Cabinet (PoE & Battery Ready)
High-reliability cabinet accommodating Gigabit PoE switches, optical distribution (ODF), and backup batteries.
8-Port IAD Controller Outdoor Cabinet
Specialized pole-mounted cabinet designed for dual IAD controllers, SMPS, and modem accessories.
 Splice Chamber.webp "20-Ton Direct Buried Cable (DBC) Splice Chamber - Fiber Opti Ink Technical Specifications & CAD Details")
20-Ton Direct Buried Cable (DBC) Splice Chamber
High-compression watertight chamber engineered for direct underground burial under active road traffic.
Modular Manhole & Pull Chamber with Poly-Concrete Cover
Stackable subterranean pull chamber enabling optical fiber pulling without excavating deep cavities.
FRP Optical Fiber Cable Loop Box
Dedicated composite loop storage chamber protecting fiber optic slack along highway utility corridors.
50kA Fault-Tested Shrouded Electrical Feeder Pillar
Heavy-duty composite electrical feeder pillar tested for 50kA short-circuit fault levels with shrouded busbars.
.webp "EV Charging Feeder Pillar (315A & 630A Heavy-Duty) - Fiber Opti Ink Technical Specifications & CAD Details")
EV Charging Feeder Pillar (315A & 630A Heavy-Duty)
High-ampacity power distribution panel tailored for commercial EV charging stations and fleet infrastructure.
Petrol Pump Dispenser Panel (NROP-4 / PDB with 8 LDBs)
Flame-retardant electrical power distribution panel engineered specifically for fuel retail outlets.
.webp "Polycarbonate Splice Trays & Organizers (12/24/96 Fibers) - Fiber Opti Ink Technical Specifications & CAD Details")
Polycarbonate Splice Trays & Organizers (12/24/96 Fibers)
Precision molded splice trays with transparent acrylic covers and color-coded fiber management.
.webp "Fiber Protection Sleeves & Patch Cords (LC/SC/ST) - Fiber Opti Ink Technical Specifications & CAD Details")
Fiber Protection Sleeves & Patch Cords (LC/SC/ST)
Deburred stainless-steel fusion protection sleeves and low-loss single/multimode optical patch cords.
ADSS & Figure-8 Cable Spacers with Heavy-Duty Ties
UV-stabilized aerial cable spacers for maintaining critical clearance between optical lines and power conductors.
Hot-Molded FRP/GRP Industrial Wellglass Fixture
Heavy-duty weatherproof industrial wellglass with toughened glass cover and SS toggle latches.
Hot-Molded FRP LED Wellglass (30W / 40W / 60W)
High-efficiency industrial LED wellglass fixture delivering 100 lumens per watt with built-in precision driver.
Industrial Retrofit LED Lamps for Wellglass (30W to 100W)
Direct screw-in retrofit LED unit with built-in driver for upgrading existing wellglass fixtures.
Custom Electrical Panels, Feeder Pillars & Busbar Systems
Fiber Opti Ink operates 3 integrated Mumbai manufacturing facilities (Ghatkopar Industrial Estate, Veera Desai Andheri West, and Jogeshwari West) equipped with 500-ton hydraulic compression molding presses, CNC tool rooms, and certified electrical testing labs.
Whether you require custom busbar ratings (up to 1250A), Low Tension (LT) panels, Power Control Centers (PCC), Motor Control Centers (MCC), or custom CNC cable entries and gland plates, our engineering sales team in Mumbai provides tailored drawings and tender-compliant solutions.
Request a Custom OEM Quote
Directly contact our Mumbai technical sales engineers with your CAD drawings or required bill-of-materials.
Ready to Order or Request Technical Datasheets?
Whether standard 4-way junction boxes, 20-ton roadworthy DBC pull chambers, or 50kA busbar feeder pillars, our Mumbai production works are equipped for fast delivery across India.